Autel MaxiBAS BT608
Display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics.
Make Offer
Make an Offer
Thank you for your interest! Please complete the form below with your offer details. Our team will review it and respond to you as soon as possible.
- Accurate Battery Diagnosis Autel MaxiBAS BT608 is a professional analysis tool for testing 6- and 12-volt batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries. With the Adaptive Conductance technology, you can get the most accurate test results and deduce the mis-diagnosis to lowest.
- Intuitive Adaptive Conductance BT608 can test low or almost completely discharged batteries, and it can be done in the vehicle without disconnecting the terminals, no more mis- and repeat diagnosis, accurate test results for one try.
- Cranking & Charging Test, Electric Reset- Autel BT608 battery load tester can run a complete test on automobile cranking and charging system. Adaptive Conductance algorithm to fast test the starter/generator and complete diagnostics for all electrical systems
- Data Viewing/Printing Autel Digital Auto Battery Analyzer BT608 has data review function that enables technician to review the data record, and print out the diagnostic report instantly with the built-in thermal printer, sharing report by email is supported
- Full Systems Diagnois Autel all systems diagnosis scan tool BT608 is not only a professional battery tester, but also an ideal wireless FULL SYSTEMS scanner, it has same vehicle/year coverage as autel MX808/ MK808/ MK808BT.
The Autel BT608 is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The BT608 can display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. The BT608’s VINscan function enables quick identification of the vehicle and battery specifications. Read/Clear codes on all available vehicles systems. Print or share customized reports via Wi-Fi or print test reports via the built-in thermal printer.
- Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
- Test 12-volt batteries: 100 - 3000 CCA
- Test 12-volt cranking/charging systems
- Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
- Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
- One-touch Battery registration
- Quick display of battery specifications through battery barcode scan, Auto and manual VIN entry
- Illustration instruction guides for battery positioning and testing
- Print test reports via built-in thermal printer
Specifications
| Operating System: | Android 9.0 |
| Screen Display: | 5.5'' LCD touch screen with 720*1280 resolution |
| Storage: | 32 GB |
| Connectivity: | Wi-Fi (802.11 a/b/g/n/ac),USB 2.0, Type C, BT5.0+EDR |
| Camera: | 8 Megapixel |
| Input Voltage: | 5 V DC |
| Working Current: | 450 mA at 7.7 V DC |
| Internal Battery: | 7.7 V, 3000 mAh |
| CCA Range: | 100 to 3000 A |
| Voltage Range: | 1.5 to 36 V |
| Working Temperature: | 0° to 50° C (32° to 122° F ) |
| Storage Temperature: | -10° to 60° C (14° to 140° F ) |
| Dimension (L x W x H): | -204 mm x 90 mm x 32 mm (8.03” x 3.54” x 1.25”) |
| Weight: |
510 g (1.12 lb.) |
Packing List
- 1x BT608 Main Unit
- 1x MaxiCVI MV200 Series
- 1x Battery Clamp Cable
- 2x Paper Roll
- 2x Battery Side Post Terminal TYPE T
- 2x Battery Side Post Terminal TYPE S
- 1x Power Adapter
- 1x USB Cable
